• The turntable increases efficiency of painting operations and shortens casket loading and unloading times;
  • Hydraulic scissor lift allows the casket to be painted at its full height during a single loading;
  • The casket can be precisely positioned and set up in order to obtain homogeneous coating effects on its entire surface;
  • Aperture stop automatically closes and opens when the operating mode is activated to ensure maximum cleanliness in the lacquering area.

Preferowany dla branży:

Preferred for the industry:

Electrical connection3 x 400 VAC / 50 Hz
Supply power15,6 kW
Supply fan power2 x 0,75 kW
Max. supply fan capacity11.800 m³/h
Exhaust fan power3 kW
Max. extraction fan capacity10.000 m³/h
Compressed air pressure6 bar
Compressed air consumption100 l/min (excluding paint spray guns)
Weight5.755 kg
Maximum dimensions of coated elements
[L x W x H]
2.500 x 900 x 600 mm
Weight of coated elementsup to 100 kg
Approximate painting time of working area
(depending on preset painting parameters)
1,5 - 3 min
Loading time of elements into the working area10 s (turntable rotation time)
  • Lid of the casket and its bottom may be painted throughout single loading operation to ensure the same colour on the entire set;
  • Previously specifically defined varnishing programmes may be saved and then selected for various patterns and casket types;
  • Edges of the caskets may be painted once or several times;
  • surfaces may be cross-varnished to obtain the best results;
  • Preferred number of operators shall be 2 persons (operator and assistant).
  • A dedicated gun for staining/painting the inner edge of the casket is available;
  • Replaceable holder is provided for fixing a second set of paint spray guns;
  • A table for painting flat elements (e.g. crosses) is provided;
  • A table for painting additional equipment (e.g. feet) is available;
  • It is integrated in the barcode system;
  • System of interchangeable low-pressure tanks is installed near the spray guns;
  • Automatic paint spray gun cleaning system is applied;
  • Painting equipment (e.g. automatic paint guns, pumps, pressure tanks, etc.) is also applied.
  • The control panel is installed on the left or right side of the paint machine;
  • Number of paint circuits for painting with various varnishing materials is configurable;
  • It may be installed in the existing painting booth;
  • The exhaust fan may be located in various positions depending on the amount of space available to the painting machine.

Technical drawings